SHENZHEN OCT-TECH Home | About Us | Products | News | Download | Support | Contact Us

M35080V6 EEPROM Eraser Programmer

M35080V6 EEPROM Eraser Programmer

Easy to use Windows 98/2000/XP software:

  • Read, Program, Erase Incremental Registers\EEPROM
  • Erase time to Delivery State* 1-3 seconds
  • Erase time to Delivery State for M35080V6 1-10 minutes
  • Supported all clock rates 2.5, 5.0 and 6 MHz IC's.
  • In-circuit/On-board EEPROM programming
  • On-board EEPROM programming for M35080V6
  • Self-Check capabilities
  • Onboard processor ATmega16 allow to Firmware Update to new versions
  • 4 adaptors for SO8 device
  • Additional items you'll need to use this tool:
    1) Host: A 32 Bit x86 based or Pentium PC with a free Com1-8 communication port.
    2) Power supply: An 12 Volt / 500 mA
  • NOTE: Delivery State: The first 32 bytes (incremental registers) are set to all "0"s, 16 words at $0000 The EEPROM memory array $0020-$3FFF set to all $FF. The Status register set to $10

D80D0WQ ERASER Programmer   XPROG-M v5.3 plus Dongle 

    Back