SHENZHEN OCT-TECH Home | About Us | Products | News | Download | Support | Contact Us

Battery Analyser VAT-580

 

Battery Analyser VAT-580   is designed to test the condition of the automotive battery using the latest battery testing technology. It utilizes a series of pulsed voltage across the battery cells and observes the AC current that flows in response to it. Also, it has a built-in printer.
 
The benefits of this test method are:

 -   Passive testing method is safe.
 -   Never discharges or drain the battery.
 -   Able to test condition of discharged battery.
 -   Consistent and repeatable results.
 -   Provides unique indication of battery conditions.

Also, this analyzer checks the Alternator¡¯s Charging and Starter¡¯s Cranking conditions.

It is maintenance free and no internal batteries required.  It powers up when it is connected to the battery posts during testing.

Key Features:
-   Simple and easy to use
-   Test batteries on and off the vehicle
-   Accurate results in milliseconds
-   Battery Life Analysis
-   Analysis Result: Good or Replace
-   Large easy to read LCD display.
-   Test results based on JIS, EN, DIN, SAE and IEC Standards.
-   Check Alternator charging conditions
-   Check Engine Starter conditions

Functions:
-    Tested Result Display: Good or Replace
-     Voltage Result Display
-    Capacity Display: Cold Cranking Amps (CCA), DIN, EN and IEC information relative to battery rating.
-    Internal resistance value (m¦¸)
-    Life in percentage (%)
-    Can print the data or the test results

Applications:
Use to test a wide range of 12V batteries Starting (SLI), Deep Cycled and Marine or Wet (Flooded), Valve-Regulated lead-Acid (VRLA) or Maintenance Free (MF), Sealed Maintenance Free (SMF), Absorption Glass Mat (AGM) and GEL cell. The major battery standards such as: JIS, SAE, EN, DIN and IEC are supported.
 
 
OperatingParameters:
System voltage        :   12 Volts
Input voltage range   :   9V~15V
Power requirement   :   No internal batteries required. Power on when hooked up during testing
Testing range          :   100~1700 CCA, 100~1000 DIN, 100~1000 IEC, 100~1700 EN
Test Time               :    Less than 5 seconds
 
 
    Back