VAG TACHO V5.0
Vagtacho usb version 5.0，lastest version 5.0，support VDO with 24C32 or 24C64
our vagtacho usb version 5.0 includes the functions of  vagtacho usb 4.52 ， vagtacho usb 4.0，and vagtacho usb 3.5

VAG Kombiinstrument / Immo box eeprom programmer!
Windows 7, Vista, Win XP, Win 98 compatible software!
Support for some VDO dashes for VW from year 2009-2011 with NEC mcu and 24C32 or 24C64 eeprom memory. Important: These dashes requires ignition to be switched on with valid key of the car! Software version 5.0 works ONLY with interfaces which has got built-in programmer for Megamos ID48 transponders!
Built-in programmer for Megamos ID48 transponders! Pre-programming of TP2x transponders as dealer's keys with component security data which is read from immobiliser!
NEW key programming feature for VAG cars with VDO dashes on CAN bus! (TP2 and UDS protocols)

Note: TP22,23,24,25 transponders are required!

List of supported VAG cars:
Volkswagen
Golf 6, Jetta, Polo, EOS with VDO dash 2009 - 2011, note: not all dashes are supported!
Golf 5, Caddy, Touran, Jetta, EOS with VDO dash 2003 - June.2006
Golf 4, Bora with VDO or Motometer/Bosch dash: 1997-2003
Beetle with Marelli dash: 1998 - 2005
Passat, Jetta, with VDO, Marelli or Motometer dash: 1997-2004
Polo with VDO or Motometer dash: 1999-2006 (1999-2002 mileage change only)
Sharan with VDO dash: 2000-2004(mileage change only)
Caddy, Lupo with VDO or Motometer dash 1997 - 2002(mileage change only)
Transporter with VDO dash 1998 - 2000
LT35 ( Temic immo box) 1999-2003 (pin code read only)
Gol ( Kostal immo box) 1999-2003 (pin code read only)
Seat
Altea, Leon, Toledo with VDO 2003 - 6/2006
Leon, Toledo, Cordoba, Ibiza with VDO or Motometer dash 1997-2003
Alhambra with VDO 2000 - 2004(mileage change only)
Inca with VDO or Motometer 1997 -2000(mileage change only)
Skoda
Octavia II with VDO dash 2005 - 6/2006
Octavia, Fabia with VDO dash 1997 - 2004
Audi
A3 VDO dash 2003 - 2005
A3,A4,A6 VDO dash 1997 - 2000
A3,TT,A6 Magnetti Marelli dash 1998 - 2003
A4 Bosch dash 2000 - 2008 - Read/write of encrypted data with V4.5!
A4,A6,A8 1995-1999 (immo box - read pin code)

2.vag tacho usb version 4.52
Vagtcho 4.52 is upgraded from vag tacho usb4.0, Upgrade Vagtacho usb 4.0 interface with Programmer for Megamos ID48 chips, our vagtacho version 5.0 has upgraded directly ,includes the functions for vagtacho usb 4.52
The benefits with this upgrade are:
Your Vagtacho interface will works with software vesrion 5.0 for the new VDO dashes with UDS protocol from year 2009+
Programming of new keys to VAG cars which are into FAZIT database.
Works with cars which has got locked key programming channel, or pin code is not accepted.
No need to wait up to 30 minutes for the key programming procedure.
With this upgrade, Vagtacho can program the new key in one minute

.
3.Vagtacho version 4.0
 VAG Kombiinstrument / Immo box eeprom programmer!
 
Windows 7, Vista, Win XP, Win 98 compatible software!
 
Works on any computer which has got USB port!
 
Most of VAG dashes from 1997 to 2006 are supported!
 
Direct programming of Megamos ID48 (JMA-TP08) chips
 
to VAG cars on CAN bus from November.2003 to June.2006
 
Transponder Maker Pro is required for pre-programming of these chips.
 
Note: TP22,23,24,25 transponders are NOT required!
 
1.Main functions:
 
1.read ecu info
2.read pin
3.change mileage
4.read eeprom
5.programmer new key
6.write eeprom
7.clear ecu errors
8.viem memory buffer
 
2.List of supported VAG cars:
 
Volkswagen
 
Golf 5, Caddy, Touran, Jetta, EOS with VDO dash 2003 - June.2006
 
Golf 4, Bora with VDO or Motometer/Bosch dash: 1997-2003
 
Beetle with Marelli dash: 1998 - 2005
 
Passat, Jetta, with VDO, Marelli or Motometer dash: 1997-2004
 
Polo with VDO or Motometer dash: 1999-2006 (1999-2002 mileage change only)
 
Sharan with VDO dash: 2000-2004(mileage change only)
 
Caddy, Lupo with VDO or Motometer dash 1997 - 2002(mileage change only)
 
Transporter with VDO dash 1998 - 2000
 
LT35 ( Temic immo box) 1999-2003 (pin code read only)
 
Gol ( Kostal immo box) 1999-2003 (pin code read only)
 
Seat
 
Altea, Leon, Toledo with VDO 2003 - 6/2006
 
Leon, Toledo, Cordoba, Ibiza with VDO or Motometer dash 1997-2003
 
Alhambrawith VDO 2000 - 2004(mileage change only)
 
Inca with VDO or Motometer 1997 -2000(mileage change only)
 
Skoda
 
Octavia II with VDO dash 2005 - 6/2006
 
Octavia, Fabia with VDO dash 1997 - 2004
 
Audi
 
A3 VDO dash 2003 - 2005
 
A3,A4,A6 VDO dash 1997 - 2000
 
A3,TT,A6 Magnetti Marelli dash 1998 - 2003
 
A4 Bosch dash 2000 - 2005
 
A4,A6,A8 1995-1999 (immo box - read pin code)

Vagtacho v5.0
How to program new transponder keys with Vagtacho!
This procedure works with VDO dashes on CAN bus (UDS protocol) from year 2009-2011
1.

Switch ON ignition with VALID key!
Start software, select "VDO NEW - CAN - UDS protocol" from menu. Press "Connect Selected ECU" button, after about 30 seconds software will get access to the dash.
Message "Access Granted" must appears on screen, otherwise this is unsupported dash, or the key is not valid!
Important: copy-paste in a text file the information which is marked in blue! If you know this key, you can get access to the same dash in future without valid key of the car!
Press "Disconnect" and see the next picture.
2.
 
Press "Disconnect", turn OFF ignition, and remove the valid key. Insert the new key with new Megamos ID48 transponder and switch ON ignition with the new key. Do NOT close Vagtacho software ! Press "Connect Selected ECU" button, after about 5 seconds software will get access to the dash again. Press "Program New Key", a new window will be open, see the picture. Check "Erase all old keys" if you wish. In this case all keys will be erased. If you left this unchecked, the new key will be added to the existing keys. No need to program all available keys again. Press "Continue" , the new key will be programmed in 5 seconds. Wait while the immobiliser accepts the new key, a message will be on the dashboard's display: "2-2" "3-3" ect. for every next key. Turn off/on ignition, and start engine. If the immobiliser's shows on display "1-2" or "2-3" this means that the type of the transponder key is not correct, or this key is already programmed to the car! Do NOT repeat the programming procedure if immobiliser shows different digits "1-2" or "2-3"! Just switch ON ignition with NEW Megamos ID48 transponder key! If you want to program more than one new key, repeat again the same procedure for every next key.

 This procedure works with VDO dashes on CAN (TP2 protocol) MY2003-2007, and Audi A4 MY2005-2008!
1.
Switch ON ignition with the new key. Be sure that the type of transponder key is correct, use TP23 for VW, TP25 for Audi, TP22 for Seat, TP24 for Skoda! Start software, select "VDO NEW - CAN bus" from menu. Press "Connect Selected ECU" button, after 5 seconds the data of the dash will be shown on screen. Press "Program New Key", software will open a new window. See the picture.
Check "Erase all old keys" if you wish. In this case all keys will be erased. If you left this unchecked, the new key will be added to the existing keys. No need to program all available keys again. Press "Continue" , the new key will be programmed in 5 seconds. Wait while the immobiliser's warning lamp is turned off. Turn off/on ignition, and start engine. If the immobiliser's warning lamp starts flashing faster, this means that the type of the transponder key is not correct, or this key is already programmed to the car! Do NOT repeat the programming procedure if immobiliser's warning lamp is flashing faster! Just switch ON ignition with right type TP2x transponder key! If you want to program more than one new key, repeat again the same procedure from the beginning for every next key.
The next procedure works with K-Line cars ONLY!

Switch ON ignition with the new key. Start software, and press "Connect Any Tacho" for all cars with immobiliser inside dashboard. If the car has got separate immo box, select immo box from "Select ECU" menu and press "Connect Selected ECU"
Important! VW Polo, Skoda Fabia, Seat Ibiza from year 2007+ has got immo inside dash board, but these cars are programmed like VW Immo box! Turn on ignition for 10 minutes before to start the programming procedure!
5 seconds after the connection the data of the dash will be shown on screen. Press "Program New Key", software will open a new window. See the picture. Enter correct PIN code , and the number of all keys which has to be programmed to the car. Select "Channel 21" for cars with immo2 or 3. Select "Channel 1" for cars with immo1. Press "OK" , and read messages on the screen. The new key will be programmed to the car in 5 seconds. Wait while the immobiliser's warning lamp is turned off and turn ignition OFF. If you have to program more than one key, turn ON ignition with the next key, and wait until the immo's warning lamp is turned off. If the immobiliser's warning lamp starts flashing faster, this means that the type of the transponder key is not correct, or this key is already programmed to the car! For some old cars, before year 2000, trun off ignition after programming of the last key, and wait 3 minutes before to start engine.

VAG PIN Reader Key Programmer Device via OBD2

Super VAG K+CAN Plus 2.0

VAG COMMANDER 8.6

VAG COM 11.11