Toyota G and Toyota H OBD2 Key Programmer

1.For 4D67,68,72(G), support both G and H chip, test on 2015 Camry
2.Programm both Toyota G and Toyota H chip vehicle via OBD2 port.

Toyota add remote control

Get in the car and close the door, insert the key and turn on the key, insert the device into OBD. After the sound(Dee-), it will start to add the remote control.
After the sound ( Dee- Dee-),open the door, when hear the sound blaring. Press ‘ lock & unlock’ key at the same time. And press the’ lock’ key. If the blaring ends, It’s OK.

Note:  Switch is on the right.(add remote control)

Toyota add transponder:

Get in the car and close the door, insert the main key into the lock and turn the key on,and then insert the device into the OBD. If it will sound twice, it will start to add transponder.
After the sound (Dee-Dee-), 2-3 minutes later, anti-theft light is on. And then remove the key( anti-theft light will flash), insert the new key and doesn’t need turn the key,anti-theft light will be off later.

Note: switch is on the left.( add transponder)

Package including:

Toyota G and H OBD2 Key Programmer