SHENZHEN OCT-TECH Home | About Us | Products | News | Download | Support | Contact Us

Tachograph programmer CD400

 

The Tachograph programmer CD400 calibrates and programs all analogue and digital tachographs.

Supported Tachographs:

Analogs: KTCO 1314/1318, Motometer EGK100, FTCO 1319, MTCO 1324/1390, TSU 1391, VR2400.
Digitals: DTCO 1381 (DTCO® 2.1 active), SE5000 (Exakt Duo), SmarTach, EFAS-4.
*A Workshop Card is required to calibrate the digital tachographs

Functions

每 W figure determination on measuring track (with optional photo-cell) or rolling road.
每 K figure measure on KTCO 1314, KTCO 1318 and FTCO1319.
每 Parameter programming.
每 Activation and deactivation of IMS (Independent Motion Signal).
每 Activation and deactivation of VDO counter.
每 Odometer reset and adjustment (mileage correction).
每 Speed simulation and customizable automatic test diagram.
每 DTCS reading (Digital) and erasing.
每 Sensor pairing (KITAS activation).
每 Clock test.
每 Workshop card*s PIN recording and input through CD400.

Technical Specifications:

每 Graphic FSTF LCD Display:
(100 x 32 pix. / 4 lines x 20 char)
White LED backlight
每 Size: 150 x 100 x 45 mm
每 Supply voltage: 9 to 30 VDC
每 Supply current: 12mA
每 Case: green-blue ABS (IP40).
每 Operating temp: -20#+70∼C
每 Weight: 155g

Advantages

每 No power connection nor battery charging required, the only tester powered by the tachograph itself.
每 Compact size, the smallest tachograph tester on the market.
每 User friendly, clear 4 lines menus, no training required.
每 Automatic tachograph model detection on power on.
每 Double accuracy of the W factor measure on track by detecting half pulses.
每 The only tester being able to reset the odometer and change the sender type on the VR2400.
每 Flash program memory, easy software upgrade using a serial port or USB serial adapter on any PC.

Multi-language menu

English 每 Deutsch 每 Español 每 Français 每 Nederlands 每 Portugu那s 每 Turkish 每 Romanian- Serbian 每 Russian

Kit included:

CD400 每 tacho programmer
Cable for 1319
Cable for 13孚孚/1318, V.Root 8400
Cable for EGK-100
Cable for 1324
Cable for V.Root 2400
Cable for CA-RS232-1
Cable for digital tacho
Manual

 

 

 

    Back