 |
| BMW INPA K+CAN |
| Interface USB OBD2 for BMW - INPA/Ediabas - K+DCAN allows full diagnostic of BMW from 1998 to 2008 (all functiosn as in OMNITEC interface). Build in 2 lines K and D-Can magistral |
 |
|
|
 |
| Fiat Scanner |
| Professional interface for diagnostics Fiat / Alfa Romeo / Lancia USB
Interface connected to a computer via the USB port, is also included OBD2 plug into the car. The device is equipped with LEDs indicating TX and RX. The device is designed for each car owner and small and medium-sized garages. The device is professionally designed but very easy to use. |
|
|
|
 |
| Ford Scanner |
| Ford-SCANNER is fully FORD compliant PC-based scan tool designed to connect to a PC's USB port made by obdfactory. It can read and clear manufacturer specific trouble codes and it has with ability to read all the manufacturer specific sensor data in real-time.
|
|
|
|
|
|
 |
| W211 R230 ABS SBC TOOL |
| Mercedes Benz cars have W211 and R230 with ABS \ SBC system , if using DAS test, the instruction as follows
TIPS:CODE C249F, OPERATION TIME OF COMPONENT A7/3 IS EXCEEDED (SBC HYDRAULIC UNIT) |
|
|
|
 |
| BMW SCANNER 2.01 |
| BMW Scanner E6x (version 2.0.1)
for chassis E60/E61(5') E63/E64(6') E65/E66(7') E87(1') E90/E91(3')
|
|
|
|
 |
| BMW INPA K+CAN |
| Interface USB OBD2 for BMW - INPA/Ediabas - K+DCAN allows full diagnostic of BMW from 1998 to 2008 (all functiosn as in OMNITEC interface). Build in 2 lines K and D-Can magistral |
|
|
|
|
 |
| OP-COM |
| OP-COM - PC based Opel diagnostic program
It covers almost all Opel cars, even new cars with CAN-BUS based diagnostic, such as Vectra-C, Astra-H, Zafira-B.
The program lets you to read out and clear fault codes, shows you live data, lets you to perform output test, and supports remote, and key programming.
|
|
|
|
|
 |
| BMW CAN PROGRAMMER |
| BMW CAN Programmer is used for modifying auto cluster odemeter data and programmering the anti-theft data via CAN communicate interface applying communicate agreement. |
|
|
|
 |
| Mercedes Benz Carsoft 7.4 |
| MCU controlled Interface for Mercedes Benz Carsoft 7.4 which is compatible with the original interface. |
|
|
|
 |
| BMW INPA V502 |
| Support of all ECU use cases in Engineering, Test, Production and After Sales
• Specification of ECU's diagnostic data
• Reading and clearing error memory
• FLASH data uploading and downloading
• Reading measurement value |
|
|
|
 |
| BMW CAS3 PROGRAMMER |
| Mileage correction for BMW CAS / MB EZS / DASHBOARDS / MODULES / with 912 / 9s12 / 9s12x MCU, in circuit programming ( no need removing mcu ), can read / edit / write eeprom of MCU, mileage calculation integrated in soft. |
|
|
|
obdcartool
